As everyone knows, Ortur laser master 2 pro is an affordable, user-friendly and easy-to-setup laser engraving machine, it helps people develop an easy hobby and establish professional-looking works. Ortur laser master 2 pro has a lot of add-ons to choose from, making the at-home DIY more fun. Among them,the Z-height adjuster is a simple but practical accessory.
Ortur Z-height adjuster is also called Z-axis lifting device(ZLD), it is only compatible with Ortur laser master 2 pro laser engraving machine, and will make the laser engraver even easier to use.
The Purpose of Z-height Adjuster for Ortur Laser Master 2 Pro Laser Engraving Machine
Z-height adjuster for Ortur laser master 2 pro has two main purposes
- Make the focal adjustment easier.
- Lengthen the moving range of the laser module in the z-axis direction.
Please read on and I will explain these two features separately
How to Adjust the Focus for Ortur Laser Master 2 Pro Laser Engraving Machine?
Without the Z-height adjuster, when adjusting the focus for Ortur Laser Master 2 Pro, you need 3 steps
Step 1: Loosen the thumbscrew on the right of the laser module
Step 2: Move the laser module up and down until getting the smallest laser spot
Step 3: Tighten the thumbscrew
With the Z-height adjuster, when adjusting the focus for Ortur Laser Master 2 Pro, you only need to twist the knob.
- Twistclockwise to slide up the laser module
- Twistcounterclockwise to slide down the laser module
Why Do You Need A Longer Z-axis Moving Range?
When engraving on the surface of thick material, you need to lift the laser module higher. Because the Z-height adjuster leaves more space above the laser module, it lengthens the moving range of the laser module in the z-axis direction for about 12mm, making it possible to engrave on thicker materials.